As an Amazon Associate headunitadvisor.com earns from qualifying purchases.

How to get rid of engine noise in car stereo?

How to get rid of engine noise in car stereo?
How to get rid of engine noise in car stereo?

Do you find yourself annoyed by the engine noise that comes through your car stereo? You’re not alone. Many drivers find this type of noise to be extremely distracting and annoying. In this post, we’ll show you how to get rid of engine noise in your car stereo so that you can focus on the road and enjoy your music.

How to diagnose engine noise in-car stereo

If you’re hearing engine noise coming from your car stereo, it’s important to figure out where it’s coming from.

The first step is to identify what kind of noise it is. Is it a low, rumble-like sound or a high-pitched whine? If it’s the latter, the problem is most likely electrical interference. But if it’s the former, there are a few different possibilities.

One possibility is that the noise is coming from your car’s engine itself. In this case, the problem is likely with your car’s exhaust system. If you have a particularly loud engine, you might be able to hear the noise even when you’re not playing music.

Another possibility is that the noise is coming from your car stereo speakers. This is most likely to happen if you have aftermarket speakers that are not well-shielded.

If you’re not sure where the noise is coming from, there are a few things you can do to try and figure it out.

How to get rid of engine noise in car stereo? Step-By-Step

Step 1: Check your car stereo’s ground wire

One of the most common engine noise causes in car stereos is a poor ground connection. If your stereo’s ground wire is not properly connected to your car’s chassis, it can pick up interference from the engine.

First, disconnect your stereo’s ground wire from the chassis to check your ground connection. Then turn on your car stereo and see if the noise goes away. If it does, your ground wire is not properly connected, and you’ll need to fix it.

There are a few different ways to do this. One is to use a self-tapping screw to make a new hole in the metal of your car’s chassis. Then, use a wire brush to clean off any paint or rust around the hole. Finally, screw the ground wire into the hole.

Another option is to use a grounding block. This is a small piece of metal that you can attach to your car’s chassis using screws or bolts. The ground wire then attaches to the grounding block.

If you’re not sure how to do this yourself, you can always take your car to a professional stereo installer, and they’ll be able to help you out.

Step 2: Use shielded RCA cables

If the noise is coming from your car stereo speakers, one way to reduce it is by using shielded RCA cables. These are special types of cables with a layer of shielding around them. This helps to block out interference from the engine.

If you’re not sure which RCA cables to buy, ask a salesperson at your local electronics store. They should be able to help you find the right ones for your car stereo.

Step 3: Use a noise filter

Another way to reduce engine noise in your car stereo is by using a noise filter. These are small devices that you can install between your car stereo and your speakers. They help filter out interference from the engine so that you can hear your music more clearly.

You can find noise filters at most electronics stores. Again, if you’re not sure which one to get, ask a salesperson for help.

Step 4: Use a sound deadening mat

If you still can’t get rid of the engine noise, you might want to try using a sound deadening mat. You can place these special mats under your car stereo speakers. They help to absorb vibrations and reduce noise.

You can find sound deadening mats at most auto parts stores. Just make sure to get those specifically designed for use in cars.

Installing a sound deadening mat is usually pretty simple. Just peel off the backing and stick the mat in place. But if you’re not sure how to do it, you can always ask a salesperson for help.

Engine noise in car stereos can be extremely frustrating. But by following these steps, you should be able to reduce or eliminate it.

Fixing engine noise in-car stereo

If you’ve determined that the ground wire is loose, the head unit isn’t properly secured, or there’s interference from another electronic device, then here are a few ways to fix the problem:

1. Check the ground wire and make sure it’s tight.

2. Make sure that the head unit is tightly screwed in place and there is no movement.

3. If you have a phone or other device plugged into the head unit, try unplugging it and see if that makes a difference.

4. If you’re still having trouble, you can try using noise-canceling headphones while you’re driving. This way, you’ll be able to enjoy your music without any interference.

5. Finally, if nothing else seems to work, you might need to replace the head unit altogether. We’ll talk more about this below.

Replacing the head unit

If you’ve tried all of the above and still have engine noise trouble, then it might be time to replace the head unit altogether. This is usually a last resort, but it’s worth considering if you’re not able to get rid of the noise any other way.

When shopping for a new head unit, make sure to look for one specifically designed to reduce or eliminate engine noise. These units typically have special features that help cancel out the noise, so it’s worth looking into if you’re having trouble with your current unit.

FAQ: How to get rid of engine noise in car stereo?

Why does my radio whine when I accelerate?

It’s possible that the alternator isn’t producing enough power to meet the demand of the car’s electrical system when you accelerate.

The alternator is a component in your car’s electrical system that converts mechanical energy into electrical energy. When it doesn’t produce enough power, it can cause a whining noise. You can try to troubleshoot the problem by checking the battery, voltage regulator, and brushes in the alternator. If those components are all functioning properly, you might need to have the alternator rebuilt or replaced.

How do I turn off the ignition noise in my radio?

There are a few ways to turn off the ignition noise in your radio. The first way is to turn the volume down on your radio. This will reduce the amount of noise you hear when you turn on your radio. The second way is to change the setting on your radio. Many radios have a setting to turn off the ignition noise. Look in your owner’s manual or consult with your dealership to find this setting. The third way to reduce ignition noise is to invest in a better-quality stereo system. A good stereo system will have less noise than a standard one, making it easier for you to enjoy your music without worrying about the engine noise. 

How do you get rid of the alternator whine on the radio?

If your car’s alternator is whining, it’s not charging the battery properly. You might be able to fix the problem by cleaning the battery terminals and replacing the spark plugs. If that doesn’t work, you might need to replace the alternator.

How do I stop my alternator from making noise in my stereo?

There are a few things you can do to try and reduce the alternator noise in your stereo system. First, make sure that all of your connections are tight and secure. Loose connections can be a major source of electrical interference. If that doesn’t help, you may need to upgrade the ground wire from your alternator to your stereo. A thicker gauge wire will help to reduce the amount of interference. Finally, you can install a noise filter between your alternator and your stereo if you’re still having trouble. This will help to block out any unwanted noise from the alternator.

What are the causes of engine noise in car stereos?

There are a few different reasons you might hear engine noise in your car stereo. It could be that the ground wire is loose, the head unit isn’t properly secured, or there’s interference from other electronic devices.

If the ground wire is loose, it can cause a buzzing sound that will be amplified through the speakers. To fix this, check the ground wire and make sure it’s tight.

If the head unit isn’t properly secured, it can also cause buzzing or rattling sounds. Ensure that the unit is tightly screwed in place and that there’s no movement.

Lastly, interference from other electronic devices can also cause engine noise. If you have a phone or other device plugged into the head unit, try unplugging it and see if that makes a difference.

How to maintain your car stereo and continue to run quietly without any engine noise?

You can do a few things to maintain your car stereo and keep it running quietly without any engine noise. First, make sure to keep the ground wire tight and secure. You should also regularly check that the head unit is tightly screwed.

If you have a phone or other device plugged into the head unit, unplug it when you’re not using it. Interference from other electronic devices can cause engine noise, so it’s best to avoid this.

Finally, if you’re still having trouble with engine noise, you can try using noise-canceling headphones while you’re driving. This way, you’ll be able to enjoy your music without any interference.

Related Article:

I am Miles Walker, founder of HeadunitAdvisor.com. I'm a car audio enthusiast and have been since I was a kid. I created the website to help people make the best decision when it comes to choosing and installing the new car stereo head unit. I have a degree in electrical engineering from UC Berkeley, and I love working on cars and audio equipment.

Leave a Comment

Headunitadvisor.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Copy link
Powered by Social Snap